

全部分类 



DC Brushed Motor

DC Brushless Motor

Gearmotor

Worm Gearmotor

Parallel-shaft Gearmotor

Planetary Gearmotor

Universal Motor

Electric Actuator

AC Special Motor

Series AT Bevel Gear Units

Wide range of speed ratio: speed ratio 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1, all are the actual transmission ratio. High mechanical transmission efficiency：the average efficiency is 98%.

Category

Heavy duty gearbox

About Us

Back

E-mail：info@shenbomotor.com

Feedback

Series AT Bevel Gear Units

Product description

Series AT Bevel Gear Units

Overview

Features

Wide range of speed ratio: speed ratio 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1, all are the actual transmission ratio.

High mechanical transmission efficiency：the average efficiency is 98%.

Can be used in positive and negative two directions.

Smooth operation, low noise,

Small volume, light weight, long service life, high carrying capacity,

Easy to disassemble, easy to repair, easy to install.

Model Description

Shenbo Electromechanical

applicable condition

Home application/Industrial/Boat/Truck/Driving part/Textile

installation instructions

As the requirements of clients/Adjustable

Shenbo Electromechanical

All 3 sets load of 196N.m, with general impact, continuous work 8 hours a day, which coefficient of performance are f1 = 1.25, helical gear input speed 300 r/min, all speed ratio of 1:1.

According to the formula:

The load of each gearbox need to afford

※ gearbox 1：Because the required load of the gearbox 1 for itself is 245N.m, and the gearbox 2 and gearbox 3 needs to transmit the torque through the gearbox 1.So the load for the gearbox 1 should be 245N.m+245N.m+245N.m=735N.m.According to the transmission capacity table, should choose AT12.

※ gearbox 2：In addition to its own load 245N.m, it still needs to pass the torque of gearbox 3. So the total load is 245N.m+245N.m=490N.m,According to the transmission capacity table, should choose AT10.

※ gearbox 3：Because of only one load C on gearbox 3,That is, the required load can be 245N.m or more.According to the transmission capacity table, can choose AT10.

Conditions of Usage

The environment temperature is -40 ℃ to 45 ℃,If it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting.

High-speed shaft speed cannot higher than 1500 rpm

The circumferential speed of the gear can not more than 20 m/s.

Specifications

AT SERIES Transmission capacity

Shenbo Electromechanical